Sport & Auto
- About Future
- Digital Future
- Cookies Policy
- Terms & Conditions
- Investor Relations
- Contact Future
||Thread Tools||Display Modes|
So I have Nvidi Geforce GTX 650ti OC 1gb PALIT.
When I run some sort of game or a program, after turning it off I start to see artifacts. like the screen is jiggling. And it is annoying, I heard that if you raise voltage of the GPU. I would like to know how much voltage should i rase. And does it even help? Maybe there are any other solutions?
My Screen resoliution : 1680x1050
I only do basic overclocks with my cards, so i increase the GPU/memory clocks until it's stable, but leave voltage alone.
[URL="http://www.anandtech.com/show/6359/the-nvidia-geforce-gtx-650-ti-review/20"]Here[/URL] is a list of stats that may help you, regarding the settings for a GTX 650 Ti. be aware that cards can vary, so you may get your card upto a certain amount, but someone with an identical card may not & vice versa, it's luck of the draw sometimes. Don't bump the card to the max settings either, move up gradually & test it for stability. And down clocking when it''s not.
Increasing voltage is where a lot of increased heat comes from, so keep a check on what temp's your getting. 70-80c is high, but acceptable, anything more and i'd be concerned. You could lower the GPU/memory clock a little at a time, 10-20mhz, this may fix it also.
Ensure you have the latest drivers from Nvidia's website for your card & operating system.
i5-760 2.8Ghz/Asus P7P55D-E / Titan Fenrir EVO/Kingston 4GB
2xWD C.Black 640GB (RAID 0)/Gainward GTX 670 Phantom/Corsair TX850w
Sound Blaster Z /CM 310/W7 HP 64bit/Asus PB278Q 2560x1440p
Zowie AM-GS/Filco Maj.2 (mx brown)/Senn.PC360/Corsair SP2500
Self built PC problems Here
Can i run game XYZ Here
How do PSU's work Here
Whats in your PC Here
Keep your PC clean Here
How to build a PC Here & Here
Last edited by fatcobra; 12-06-2013 at 04:23 PM.