Go Back   PC Gamer Forums > Tech

    Reply
     
    Thread Tools Display Modes
      #531   Report Post  
    Old 12-30-2013, 09:55 PM
    alangrift alangrift is offline
    Senior Member
     
    Join Date: May 2013
    Location: London
    Posts: 121
    Default

    My rig is an Acer Aspire V3 winth an intel i7-3632QM 2.2 ghz laptop. It has a 1 tb hardrive with a nvidia video card. It has 2gb of video card memory and it is the gt 650m series. Also the laptop has 8gb of ram upgradable to 16gb of ram. The screen size is 17.3 inches with the numerical 10 key on the side. It has four usb outputs 2 usb 2.0 and 2 usb 3.0. Bluetooth is also on this device. Windows 8 and a dvd optical drive is also installed all for the price of 900 dollars.
    __________________
    Currently Watching: Game of Thrones Season 4
    Reply With Quote
      #532   Report Post  
    Old 02-28-2014, 10:37 PM
    Gary Willard Gary Willard is offline
    Junior Member
     
    Join Date: Feb 2014
    Posts: 1
    Default







    Specifications are:

    (Nothing Spectacular)

    - G-Skill 8GB (2x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V
    - Asus GTX 760Ti DirectCU II
    - Intel Core i5 2500K 3.3GHz Socket 1155 6MB Cache Retail Boxed Processor
    - Asus Maximus IV Gene-Z Gen 3 Z68 Socket 1155 HDMI SupremeFX X-Fi 2 8 Channel Audio mATX Motherboard
    - Kingston 120GB V+200 SSD - 2.5" SATA-III
    - monitor: Acer Nvidia 3D 27 " HN274h
    - Bose Multimedia Speakers 2.1

    All cable extensions from BitFenix

    Water Cooling Specifications:

    - CPU Block: EK-Supreme LTX - Nickel CSQ
    - EK-MOSFET Max IV Gene - Acetal+EN (Nickel)
    - VGA Block: EK-VGA Supremacy - Acetal+Nickel
    - 2x EK-RES X3 250
    - Pump: Laing DDC-1T Plus 12V DC Pump (MCP 355)
    - Radiator: EK-CoolStream RAD XT (360)
    - Coolant: EK-Ekoolant Blood RED (premix 1000mL)
    - Compression Fittings: EK-PSC Adapter 90° G1/4 Black Nickel & EK-PSC Fitting 10mm - G1/4 E-Nickel
    - Thermal Paste/Grease: Arctic Cooling MX-3 thermal compound (4g)
    - Tubing: TUBE Masterkleer 12,7/9,5 CLEAR

    Running Temperatures:

    - Idle air temp inside desk 23 - 26c
    - processor 20-21c
    - GPU temperature at 23 - 25c.
    - mosfet temperature at 21 - 24c

    - under heavy load inside desk air temperature is 25 - 30c
    - Processor no higher than 46c (clocked in at 5.1Ghz)
    - GPU no higher than 48c
    - Mosfet no higher than 45c
    Reply With Quote
      #533   Report Post  
    Old 04-24-2014, 09:27 AM
    bigtallanddopey bigtallanddopey is offline
    Senior Member
     
    Join Date: Jun 2010
    Location: Sheffield, UK
    Posts: 292
    Default







    My first attempt of hard-line tubing for water cooling. I'm happy with some of it, but not so with some of it, lol. It was certainly a challenge and much harder than normal water cooling methods. I think the result is a lot neater and better looking than normal tube though. Not fully benchmarked for temps yet but with the fans on the lowest speed the temps are around 5-6 degrees cooler at idle, so so far cooler and quieter.

    my specs are in my sig, but the case is now an NZXT Switch 810, which i think is a great case not only for water cooling but for air cooling as well because of the very good cable management and space within the case.
    __________________
    i7 950 | 6GB 1600Mhz DDR3 | Asus Sabertooth X58 | R9 280X | 1TB HDD | Windows 7 64bit | Antec P182
    Origin bi3tallanddopey | steam bigtallanddopey
    Reply With Quote
      #534   Report Post  
    Old 06-06-2014, 08:16 AM
    evil_noodles evil_noodles is offline
    Member
     
    Join Date: Dec 2011
    Location: Middle of nowhere, UK
    Posts: 87
    Send a message via MSN to evil_noodles
    Default

    Quote:
    Originally Posted by bigtallanddopey View Post
    <snip>My first attempt of hard-line tubing for water cooling... </snip>
    Love black and white, I've always wanted to do something like this with my Corsair 600T Graphite White Edition.
    Can I ask what you used?
    __________________
    Please preposition the posts above, below and including with "In my opinion..."
    Reply With Quote
    Reply

    Tags

    gaming, i'm a gamer, not a fighter, rig

    Thread Tools
    Display Modes

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off

    Forum Jump